The all new Phoenix Gold SX2 Series of amplifiers offers premium build quality for ultra performance.
Each Phoenix Gold SX2 amplifier meets audio precision quality control verification and includes Phoenix Gold’s BASS SHIFT Technology.
BASS SHIFT, a new technology fitted to SX2 Series amplifiers, allows variable phase output which can be adjusted 0 to 180 degrees. This adjustment can help achieve better “up front” bass, by enhancing your sub bass and mid bass transition. BASS SHIFT also resolves subwoofer cancellation problems in certain installations which results in tight, articulate bass that blend perfectly into the rest of your audio experience.
- Master/Slave strappable for huge power and multi-amp setups
- RMD port allows you to add a remote monitoring display, giving you a visual of the voltage of your system
- Double tier power supplies with OTM Onboard Thermal Management, which monitors the amplifiers internal temperatures. If abnormal temperatures are achieved, OTM will make minor adjustments to output power to allow the amplifier to return to normal operating temperatures without interruption to the amplifier’s audible performance.
- Remote bass and phase controller with Bass Shift® (RBPC) allows for perfect adjustment of not only the subwoofer level but also 0-180° of phase adjustment from the listening position. Properly adjusting phase will allow enhanced bass response, dynamics and impact at any volume.
- Switchable balanced or unbalanced inputs based on your input source’s design for best signal to noise performance
- Auto-turn on circuit (defeatable) helps when connecting to an OEM system that does not offer a Remote turn-on lead to activate the amplifier
- Tri-light LED amplifier status indicators with short circuit, thermal and voltage protection
- Front mount controls and connections provide a more pleasing overall aesthetic while conveniently locating the amplifiers controls in the same vicinity as the connections
Total Control of Your Music Output
Variable filters on each channel allow you to fine tune your musical output to the precision you demand. All crossovers feature aluminum shaft precision potentiometers for exact crossover frequency selection.
- LAT/HP/LP/BL Crossover Range of 55Hz to 4kHz
- Bass Boost 0 to +6dB at 40Hz
Variable phase output can be adjusted 0 to 180 degrees. This adjustment can help achieve better “up front” bass, by enhancing your sub bass and mid bass transition and resolve subwoofer cancellation problems in certain installations. Resulting in tight, articulate bass that blends perfectly into the rest of your audio experience
150w x 4 Channel @ 4 ohm Stereo
200w x 4 Channel @ 2 ohm Stereo
400w x 2 Channel @ 4 ohm Bridged
H x 387mm L x 216mm W x 51mm
± 3dB from 10Hz to 39kHz
Signal to Noise Ratio
High and Low Pass Crossovers
12dB per Octave
55Hz to 4kHz
Low Level Input Range
300 millivolts to 8 Volts unbalanced
Lowest Recommended Load
2 Ohm Stereo / 1 Ohm Bridged
Greater than 200
Recommend Power Wire Fuse
Power/Ground Wire Size